Display Function using BRM (DSPFCNBRM)

The Display Function using BRM (DSPFCNBRM) command is used to display the status of miscellaneous functions in BRMS.

Function (FUNCTION)

Use this parameter to specify the function you want to add or remove.

*ALL

Display the status for all of the functions listed below.

ALWMFDP

Display if allow append of multiple parallel volumes during DUPMEDBRM is set.

APYJRNX

Display if APYJRNCHGX during journal recoveries is set.

BUEPALL

Display if the Control Group exit program is set to use format *BOTH.

BUEPFM1

Display if the Control Group exit program is set to use format BKUI0100.

BUEPFM2

Display if the Control Group exit program is set to use format BKUI0200.

CGOMITS

Display if the Control Group omits are being combined.

CHGOWNX

Display if the Start Maintenance for BRM (STRMNTBRM) command is allowed to change the owner of expired BRMS volumes that are not owned by a system in the BRMS network.

CLDNFS

Display if the BRMS cloud control groups named QCLDBIPLnn and QCLDBGRPnn will allow create virtual optical media of any size which can be used for NFS installs.

CLDRMCG

Display if the BRMS turnkey cloud control groups will be refreshed when the INZBRM *DATA command runs.

CLSNONE

Display if BRMS volume selection allows the selection of any media class that is available in the tape media library or loaded in a tape drive.

CRTDOLD

Display if the creation date of a volume is updated every time data is written to the first sequence on the volume or when QUSRBRM is saved to the volume.

CRTDOLDALL

Display if the creation date of a volume is updated every time data is written to the volume.

CTGPMPT

Display if prompting is forced on each of the volumes when option 6 is specified on the Work with Media Library Media (WRKMLMBRM) command to reset the category

to be consistent with the BRMS media class.

IGNRDUP

Display if both the original save media and the duplicate save media are included in your recovery report Recovery Volume Summary Report (QP1A2RCY) when *YES

is specified for the USEDUPMED parameter.

IPLSUB

Display if BRMS will force an IPL if BRMS receives a CPF1099 when it tries to start the controlling subsystem during control group processing.

NEWAPPEND

Display if BRMS volumes selection will use the media policy specified on the backup rather than the closest expiration date.

NLSTOMT

Display if BRMS Domino server backups omit the *.ini and *.id files and the gtrhome and /tmp directories.

NMOVINQ

Display if BRMS is configures to fail inquiry messages from tape during BRMS movement operations and prevent long delays waiting for a response to an inquiry message.

NOLTSCFG

Display if Lotus Configuration during STRMNTBRM , INZBRM *DATA or Slip Install is turned off.

NOPING

Display if BRMS is configured to stop using the PING command before every BRMS activity that involves communications.

NOSYSBP

Display if BRMS is configured to fail rather than bypass a SAVSYS if the partition is unable to reach restricted state.

NOSYSCK

Display if BRMS checks for same system when picking media and the network cannot ensure the media is available.

NOVFY

Display if BRMS is set to skip the VFYIMGCLG of the optical image catalog associated with the backup of control group QNFSIPLFUL.

NOVFYM

Display if BRMS allows media that has movement verification pending to be selected as a candidate for save or duplication.

ONLYBRM

Display if BRMS will block initializing and writing to media not enrolled in the BRMS inventory.

PRM

Display if MLB media should be ejected during media movement or movement verification.

RMTEJT

Display if BRMS is set to eject media from an MLB that is not configured on the local system.

RPTRETN

Display if an additional retention report section for VTL sizing will be generated when using the PRTRPTBRM command.

UTEST

Display if BRMS is set to collect additional tracing information for service support.

Note: Use DSPJOBLOG to see the results of this command.