Changing the Default Port

Owned by Brian Nordland
Last updated: Dec 12, 2022
1 min read

Use the Change PowerHA Webserver (CHGHAWEB) command to specify the port numbers used for the HTTP server and the HTTPS server. The port number is ignored if a particular server is *OFF.

Procedure:

  1. Run the CHGHAWEB command, specifying the desired port number. The following example changes the secure HTTPS server port to 12345: CHGHAWEB HTTPS(*SAME 12345)

Note: The PowerHA HTTP server instance must be restarted after changing the port number. See Restarting the PowerHA Web Interface for additional information on restarting the PowerHA Web Interface.

Result:

After restarting the Web Interface, the server can be accessed using the new port. For example: https://<system-name>:12345.

Privacy Policy | Cookie Policy | Impressum
From time to time, this website may contain technical inaccuracies and we do not warrant the accuracy of any posted information.
Copyright © Fortra, LLC and its group of companies. All trademarks and registered trademarks are the property of their respective owners.